6.35*32玻璃管慢斷保險絲-----UL CSA

1.規格型號和安規認證
MODEL NUMBER AND SAFETY CERTIFICATION

品名規格：系列號+額定電流+額定電壓+認證符號

   Model  Number:  Part  Number+Rated Current+Rated Voltage+Approvals.

例子[example]:
6GTU     10A    125V/250V                 1)系列號  Part  Number
                                                       2)額定電流  Rated  Current
1）          2）        3）                      3)額定電壓  Rated  Voltage

1-2 額定電流和額定電壓
Rated Current  And  Voltage
額定電流： 63mA~30A
Rated Current: 63mA~30A
額定電壓:125V/250V AC
Rated  Voltage:125V250V AC
1-3標示Marking
保險絲上需有下列標示
The fuse shall have the following marking:
規格：特性符號+額定電流+額定電壓
Specification:Characteristic  Symbol+Rated Voltage
   63mA~800mA : _mA250V    1A~30A:_A250V
Trade mark:The Manufacture’s Logo+Part Number+Approvals

63mA~30A:

注意：對標示字樣大小沒有規定
Note:Size of the markings have not be specified.

2.適用範圍
SCOPE
適用於車載電子設備。Used in car equipment.
3.工程圖和結構
OUTLINE DRAWING AND STRUCTURE
3-1 工程圖（單位：mm）
Outline Drawing and Dimensions(Unit:mm)

3-2結構
Structure

編號 No.	元件 Component	材質 Material	數量 Quantity
(1)	熔絲 Wire	合金 Alloy	1
(2)	銅帽 Cap	黃銅鍍鎳 Brass with mickel plated	2
(3)	本體 Body	玻璃管 Glass Tube	1
(4)	引線 Lead	鍍錫銅線 Tinned Copper wire	2

4.外觀及形狀
APPEARANCES AND CONFIGURATION
4-1外觀：不應有破碎、明顯的汙斑
Appearances:There shall no fragmentation and of remarkable blotch.
4-2形狀：帶腳的保險絲
Configuration:Axial Leaded Fuse.

5.物理特性
PHYSICAL CHARACTERISTIC
5-1 拉力測試
Tensile test
沿端子的軸向施加10N的拉力，持續1分鐘。
Keep pulling the cap of the fuse with 10N at axial direction for 1 min.

6.電氣特性
ELECTRICAL CHARACTERISTICS
熔斷/電流特性：
Pre-Arcing Time/Current Characteristic

a、Breaking capacity（分斷能力）

10000A	125V	AC
35A	250V	AC (less or 1A)
100A	250V	AC (1.1A—3.5A)
200A	250V	AC (3.6A—30A)

b、Electrical characteristics

Fast Acting(參照美標)

Rated current	100%	135%	200%
63mA~30A	Minimum	Maximum	Minimum	Maximum
63mA~30A	4 hours	1 hour	5 sec.	60 sec

(參照國標)

Rated current	210%		275%		500%	1000%
Rated current	Max	Min	Max	Min	Max	Max
50mA~100mA	20s	2ms	200ms	1ms	30ms	5ms
>100mA~30A	20s	20ms	1500ms	8ms	400ms	80ms

c、Temperature character
When 100% of rating the temperature rise doesn’t exceed 75℃.

d、Approvals

Amp Code	Ampere Rating (A)	Voltage Rating (V)	Nominal Cold Resistance (Ohms)	Nominal Melting I2t (A2 sec)	Agency Approvals
Amp Code	Ampere Rating (A)	Voltage Rating (V)	Nominal Cold Resistance (Ohms)	Nominal Melting I2t (A2 sec)	UL	CSA
6GTU-.010	0.01	125/250	4300.0000	0.000121	x	x
6GTU-.031	0.031	125/250	430.0000	0.00303	x	x
6GTU-.040	0.04	125/250	300.0000	0.00630	x	x
6GTU-.063	0.063	125/250	120.0000	0.0210	x	x
6GTU-.100	0.1	125/250	43.0000	0.0850	x	x
6GTU-.125	0.125	125/250	30.0000	0.152	x	x
6GTU-.150	0.15	125/250	20.0000	0.270	x	x
6GTU-.200	0.2	125/250	6.5900	0.270	x	x
6GTU-.250	0.25	125/250	4.2700	0.385	x	x
6GTU-.300	0.3	125/250	3.1350	0.730	x	x
6GTU-.375	0.375	125/250	2.0950	1.23	x	x
6GTU-.400	0.4	125/250	1.8750	1.35	x	x
6GTU-.500	0.5	125/250	1.2600	2.55	x	x
6GTU-.600	0.6	125/250	0.9120	4.00	x	x
6GTU-.700	0.7	125/250	0.7000	5.90	x	x
6GTU-.750	0.75	125/250	0.6215	7.16	x	x
6GTU-.800	0.8	125/250	0.5540	8.00	x	x
6GTU-001.	1	125/250	0.3750	14.0	x	x
6GTU-01.2	1.2	125/250	0.2780	21.5	x	x
6GTU-1.25	1.25	125/250	0.2600	24.0	x	x
6GTU-01.5	1.5	125/250	0.1910	38.0	x	x
6GTU-01.6	1.6	125/250	0.1710	49.6	x	x
6GTU-002.	2	125/250	0.1169	77.0	x	x
6GTU-02.5	2.5	125/250	0.0811	130	x	x
6GTU-02.8	2.8	125/250	0.0675	170	x	x
6GTU-003.	3	125/250	0.0593	200	x	x
6GTU-004.	4	125/250	0.0311	76.1	x	x
6GTU-005.	5	125/250	0.0214	140	x	x
6GTU-06.3	6.3	125/250	0.0154	242	x	x
6GTU-007.	7	125/250	0.0128	347	x	x
6GTU-008.	8	125/250	0.0111	445	x	x
6GTU-010.	10	125/250	0.0083	760	x	x
6GTU-012.	12	125/250	0.0065	1200	x	x
6GTU-015.	15	125/250	0.0050	1870	x	x
6GTU-020.	20	125/250	0.0022	9560	x	x
6GTU-025.	25	125/250	0.0017	16500	x	x
6GTU-030.	30	125/250	0.0012	26900	x	x

7.環境特性
ENVIRONMENTAL SPECIFICATION
7-1 操作溫度範圍：-20℃~60℃
Operating Temperature: -20℃~60℃
7-2 保存條件
Storage Conditions
溫度：-30℃~80℃
Temperature: -30℃~80℃
在相對濕度≤75%下平均可存放3年
On average, It can be stored below the relative humidity or 75% for 3 years.
在非露天下，相對濕度為95%下最多可存放30天。
Without dew, It can be kept under humidity of 95% for 30 days.

8.焊接條件
SOLDERING PAAMETERS
8-1波峰焊
Wave Solder
焊接溫度：260±5℃
Soldering Temperature:260±5℃
焊接時間：4 Sec. Max.
Soldering Time:4 Sec.Max.
8-2手工焊錫
Manual Solder
焊接溫度：350±5℃
Soldering Temperature: 350±5℃
焊接時間：3 Sec. Max.
Soldering Time: 3 Sec. Max.

9.其他使用注意事項
OTHER NOTICE IN USING
如果需在保險絲上加熱縮套管，烘烤溫度與時間需參照以下規定
If heat shrink tubing was needed,the roast temperature and time should be refer to the following.
設定烘烤溫度：不大於150℃ 烘烤時間：50s Max.
The temperature should be se

東莞市富寬源電子有限公司（東莞市富源電子科技有限公司）成立于1998年，主要從事安規元器件生產和銷售，通過10年的改革和努力現在的富寬源已經成為集生產和銷售為一體的安規元器件總匯；富寬源將繼續秉持品質第一、服務客戶的原則不斷為廣大客戶提供質優價廉的產品。我公司目前主要提供如下產品: 電流保險絲-CurrentFuse 玻璃管電流保險絲陶瓷管電流保險絲貼片電流保險絲電阻式保險絲微型電流保險絲高壓電流保險絲直流電流保險絲交流電流保險絲 SMD-貼片式自恢復保險絲 AI-插件式自恢復保險絲保險絲座-Fuseholder ESTMF系列保險絲座 EDKFH系列保險絲座 SKPTF系列保險絲座 AUTO--汽車保險絲座 OPWOP系列保險絲座拉線盒式保險絲座保險絲夾&端子保險管座保險座大電流|高壓保險座溫度保險絲-Thermalcutoffs 方塊形溫度保險絲電阻式溫度保險絲大電流溫度保險絲陶瓷溫度保險絲鐵殼溫度保險絲 SW.C溫度保險絲 NEC溫度保險絲艾默生溫度保險絲內橋溫度保險絲松下溫度保險絲 AUPO溫度保險絲溫度開關/溫控器-Thermalprotector 熱保護器/可恢復溫控器風筒式溫控開關/溫控器馬達熱保護器/溫控器除霜除濕溫控器/溫控開關 超低溫溫控開關/溫控器微型溫控開關/溫控器溫度開關/溫控器-Thermalprotector 7AM/17AM溫控器 KSD301系列溫開關 KSD-01F插腳溫開關 9700系列方塊形溫控開關 BR系列溫控開關 SEKIST-22溫控器壓敏電阻-Varistors 壓敏電阻氧化鋅壓敏阻器貼片壓敏電阻 SMD壓敏電阻插件型壓敏電阻高能壓敏電阻汽車保險絲Autofuse/carfuse 小號汽車插片保險絲FY-MIN 中號汽車插片保險絲FY-ATC 大號汽車插片保險絲FY-MAX 小號叉栓式汽車保險絲FY-UF 大號汽車叉栓式保險絲FY-MF 管狀|柱狀汽車保險絲其他型號汽車保險絲過載保護器-CIRCUITBREAKER AR1/AR2系列過載保護器 W系列過載保護器 88/88A系列過載保護器 90系列過載保護器 91/91L系列過載保護器 97/98/98H系列過載保護器帶開關系列過載保護器熱敏電阻-NTC/PTCThermistor 負溫度系數熱敏電阻陶瓷正溫度系數熱敏電阻高分子正溫度系數熱敏電阻溫度傳感器濕度傳感器本公司將繼續通過ISO9000質量管理體系的有效實施，使涉及企業生產經營的各個運作環節，均嚴謹有序，不斷制造出質優價廉、適銷對路的產品參與市場競爭，使企業長期保持較強的經營獲利能力。同時我們將長期重視與行業知名企業合作，爭取最大限度的代理權，以最優惠的價錢把產品銷售給客戶。

<< 上一頁：6.35*32玻璃管快斷保險絲-----UL CSA || 下一頁：沒有了 >>